Leadtek WinFast TV2000 XP Deluxe User Manual download pdf (Page 41)

OTHER SOURCES

4-1 Device Setting for Other Sources

Device Setting for Other Sources

Click on the control panel, then the label to open the Device Setting dialog box as

shown in the figure below.

1. First please make sure the you have using the "Video Input " button on the

control panel (please refer to page 7) to switch the video input to the one you

want. You can check which input source you are using here.

2. [Video Standard]

Please make sure that you have choose the right video standard depending on your

input device from the drop-down list.

Most of the device settings for other input sources are the same as the setting on page

15 and 16. However, to obtain correct sound and video from other input sources,

please double check the following setting:

3. [Audio-Out Control Line] & [Recording Control Line]

If you use the external connection (please refer to Fig.12 on page 16) for audio out,

please change both Audio-Out and Recording Control Line to Line In. If you use

internal connection, please connect the cable in Fig. 13 (on page 16) to the Aux-

in/CD-in connector on your motherboard, and change both setting to "Aux-in/CD-in".

The Aux-in and CD-in connectors on the motherboard show as Fig. 14 (on page 16),

and you can find the indications on the board in most cases.

4. [Recording Volume]

Move the slider knob on the indicating bar to turn up/down the volume. What is set

here will also affect the playback volume.

Fig. 29

Video Standard

Audio-Out Control Line

Recording Control Line

Recording Volume

CVBS

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 49 50

No comments

Leadtek WinFast TV2000 XP Deluxe User Manual Page 41